Pc-concepts Full-Rated Router ADSL2+ Uživatelský manuál stáhnout pdf (Strana 19)

Configure IP address Manually:

Step 5: Select Use the following IP address & Use the following DNS server

addresses.

IP address: Fill in IP address 192.168.1.x. (x is a number between 3 to 254).

Subnet Mask: Default value is 255.255.255.0.

USB interface Default gateway: Default value is 192.168.1.2.

Ethernet interface Default gateway: Default value is 192.168.1.1

Preferred DNS server: Fill in preferred DNS server IP address.

Alternate DNS server: Fill in alternate DNS server IP address.

You can use ping command under DOS prompt to check if you have setup TCP/IP

protocol correctly and if you computer has successfully connected to this router.

For example, USB interface ping to the gateway

* Type ping 192.168.1.2 under DOS prompt and the following message will appear:

Pinging 192.168.1.2 with 32 bytes of data:

Reply from 192.168.1.2: bytes=32 times<1ms TTL=64

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 103 104

Žádné komentáře

Pc-concepts Full-Rated Router ADSL2+ Uživatelský manuál Strana 19